RXSOL

Hi-Tech Maintenance Solutions

Decalex Powder
 

Item Code: RXSOL-15-1008-025

Product Description:-
Descalex is a dry acid cleaner formulated to remove rust and scale deposits.

Directions for Use and Dose Rates:-
The most effective Descaling is accomplished by circulation. In the case of small components, the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease and sludge, then pre-cleaning with Sea clean Plus or Enviro clean. Depending on the extent of scaling, use a solution of 2.5-10% Descalex. The solution will have a red color which disappears when the solution is neutralized. Whenever possible, the solution should be heated to 60°C. Neutralized solutions can be reactivated by adding more Descalex until the red color reappears. This should not be done more than twice. Descalex should not be used on aluminum, zinc, tin or galvanized surfaces. Descaling of Boilers, Descaling of Diesel Engine Cooling Water Systems, Condensers,

Evaporators, Clarifiers, Heat Exchangers:-
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descalex. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descalex a 0.5% solution of Alkalinity Control in fresh water should be used for neutralization.

Features, Benefits and Applications:-
1.Dry acid cleaner contains inhibitors to protect metals.
2.Contains color indicator to show the strength of the solution and anti-foam agent.
3.Safe and easy handling and storage.
4.Fast and effective scale remover.
5.Removes scale from boilers.
6.Removes scale from diesel engine cooling water systems.
7.Removes scale and rust from condensers, evaporators, heat exchangers etc.

DescalexD

 

 

Disc Cleaner
 

Item Code: RXSOL-16-1007-025

INTRODUCTION:-
RXSOL-16-1007 is a liquid blend of organic solvent with heavy duty & concentrated emulsifying agents. An extremely effective for removal of burnt grease, carbon deposit, oily residues and lacquers found in fuel oil and lube oil purifiers and filters.

FIELDS:-
A very fast & effectively removes without the need of Scrubbing and Brushing of Centrifugal Separators, Disc & all types of heavy tenacious deposits which collect in fuel & lube oils centrifugal separators disc stacks.

NOTE:- Mechanical cleaning (Scrubbing and Brushing ) damage to discs which results in poor performance.

Procedure:- Should be diluted, at the rate of 1-parts RXSOL-16-1007 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt / contamination RXSOL-16-1007 may be used directly. At 50 to 60°C for best result apply higher concentration for 15 min. to 3 hours. After the unit or parts have been satisfactorily cleaned, they should be rinsed thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc, Tin, Galvanized surfaces or Anodized Aluminum.

NOTE: - 
Recirculation and heating will improves the cleaning action.

Characteristics:-
1.Formulated to remove heavy tenacious deposits.
2.Allows cleaning of discs without dismantling of disc stacks.
3.Reduces downtime.
4.Improves efficiency of centrifuge installation.
5.Cleans down to metal surfaces.
6.Cleans all types of separator discs.

 

DiscCleaner

 

 

T-Pol
 

Item Code: RXSOL-20-T300-050

RXSOL-20-T300-050 is a multipurpose heavy duty cleaning soap solution used as a common dirt remover in residential, commercial and industrial cleaning processes. 

Packaging: 50.00 Ltr. 

Application: 

  • Universal cleaner for home, institutes, plant and machinery, compatible with all type of surfaces.
Note:
 
  • RXSOL-20-T300-50 has a long non-polar hydrocarbon chain and a highly polar group at the end of the molecule thus having a cleaning power better than ordinary soap.

 

 

 

Contact Us : 123@rxmarine.com