Newsletters

RXSOL - COLD WASHER HD

RXSOL-10-2003-025

For Removal of Crude Oil and High Melting Point Stains

Item Code: RXSOL-10-2003-025

Cold Wash is for complete removal of dirt, oil, carbonized grease, heavy oil, gum , vegetable oil , Lube oil, soot , asphalt ,paraffin, carbon stains etc. Gives clear finish to the surface. Highly effective for the removal of crude and other high melting point stains.
RXSOL-10-2003 is non- corrosive to metal like copper, aluminum, Mild steel, and plastic. It is non toxic which makes handling easy.

More Info..

Advantages :
RXSOL-10-2003 is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time. Non corrosive to most of the metals / plastics. Gives clear finish to the surface .Lower cost due to high concentration.

PROCEDURE OF USE :
1st Method

SPRAY METHOD :- Mix 1 part of RXSOL-10-2003-CW with 2 -10 parts of water / GAS-OIL ( For heavy oil, greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minted of spray the RXSOL-10-2003-CW starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.

2nd Method

IMMERSION PROCESS :-
Application in immersion process with or without ultrasonic support, manual wiping.

3rd Method

RE-CIRCULATION METHOD :-
RXSOL-10-2003-CW is also used in conjunction with alkaline degreasing bath at 2-10% (v/v) concentration for better and quick degreasing action. Either’s the bath is heated to be 70°Cor the solution can be stirred or air agitated. FINALLY RINSE THE SYSTEM WITH FRESH WATER.

Fields of Application:

  • Treated for the really tough daily cleaning problems faced in the proper Maintenance of Industrial and Institutional physical plants.
  • Can be used as a stripper for all types of waxes and finishes and as a Degreaser where regular cleaners will not perform.
  • May be brushed on , sprayed or used in a dip tank .
  • Excellent for use as a wash for fuel tankers & as a liquid steam jenny compound.

Caution:
AVOID contact of RXSOL-10-2003 with skin or eye Contact. If contact occurs wash with ample quantity of water. NOTE : on dilution RXSOL-10-2003-CW is more effective and safe for use on epoxy, polyurethane ,zinc-silicate coatings and stainless steel.