Newsletters

RXSOL-16-1082 Coil Cleaner is a special blend of effective ingredients designed to penetrate and remove built-up grease, dirt and oxidation from finned coils, cleaning in one step. This Coil Cleaner DOES NOT CONTAIN ACID.

SKU: RXSOL-16-1082-025

Application:

Rx Marine International developed the formulations for water treatment products based on the latest available technology and continue to keep them up-to-date with our modern laboratory facilities. All of our water treatment products are biodegradable, environmentally compatible and have low health hazard ratings. Additives Inc.’s water treatment products are manufactured at its plant in Denver under a strict quality control program.We monitor our customers’ steam and water systems both by analyzing samples in our lab and by testing in the field upon request Water Treatment Products.

Packaging: 25.00 Ltr.

Benefits

Economical

Safer than acid cleansers

cleans coils in one-step no rinsing needed

High foaming for faster penetration

Dose:

¨ Economical - mix one part Evaporator Coil Cleaner to four parts water.
¨ Safer than acid cleaners.
¨ Cleans coils in one step - no rinsing needed.
¨ High foaming for faster penetration

Note:

Use Instructions:
1. Protect eyes and skin with appropriate safety items.
2. May be used with unit on or off.
3. Use low pressure spraying tank.
4. Mix one part RXSOL-16-1082 Coil Cleaner to four parts water.
5. Spray RXSOL-16-1082 Coil Cleaner solution into coils and allow approximately a ten minute contact time for best results. Condensate will rinse coils. Rinse filters with clean water.

Caution: Avoid contact with eyes, skin and clothing. This product contains organic cleaners and inorganic dispersants. Wear goggles and protective clothing. Do not breath mist. For external contact, flush with water for 10 minutes. If taken internally, drink large amounts of water, followed with milk of magnesia, beaten eggs, or vegetable oil. Call a physician immediately. KEEP OUT OF THE REACH OF CHILDREN.